Honda e [Advance] Sound System

[marab]

I had new speakers installed in my front door yesterday. We chose the Blam Relax 2 speakers, the change is really big.
The result of the assembly is fantastic.


https://www.carmedia.cz/montaze-autohi ... eni-dveri/

[Joolsdc]

Very good
What is the Standard Professional black plastic covering? Does this help to damp out unwanted sounds?

Thanks for the photos

[marab]

http://ctk.eu.com/assets/files/CTK%20S ... %20PRO.pdf

[FDAD]

Looks great! I ended up with Audison Prima APK 165 and no regrets

[williamchan]

Looks great! I ended up with Audison Prima APK 165 and no regrets

Hey FDAD, I am about to get the same and can you share more info like if it's a one-to-one replacement or how much work like cutting material etc wll be required?

[FDAD]

Looks great! I ended up with Audison Prima APK 165 and no regrets

Hey FDAD, I am about to get the same and can you share more info like if it's a one-to-one replacement or how much work like cutting material etc wll be required?

Woowow stop right there! Don't you dare to cut anything! The is no need for that, for the mid speakers you'll need adapters both for wires and for the speaker itself. The original tweeters can be unscrewed and the new ones hotglued in place. I didn't cut a single wire.



You'll need something like this.

[williamchan]

Looks great! I ended up with Audison Prima APK 165 and no regrets

Hey FDAD, I am about to get the same and can you share more info like if it's a one-to-one replacement or how much work like cutting material etc wll be required?

Woowow stop right there! Don't you dare to cut anything! The is no need for that, for the mid speakers you'll need adapters both for wires and for the speaker itself. The original tweeters can be unscrewed and the new ones hotglued in place. I didn't cut a single wire.



You'll need something like this.

yea I had this adapter ordered days ago and wanna try it out anyway before cutting anything! now that I know the adapter will work and I think I will just wait until it arrive.

Turned out which center speaker you are using and no cutting too?

[williamchan]

I have disassembled the door panel again to measure and took a couple of photos of the process this time.

18B1BD15-53BE-406F-B324-783F5F9D91EF.jpeg
There are a total of 3 philips head screws. Two behind the door handle, and one behind a plastic cover on the mid section of the door.

8435A60D-BACD-41C9-A1D9-853953AA86CA.jpeg
The plastic cover behind the door handle has a small indent to access a single clip holding the cover in place. Press a thin and narrow piece of metal into the indent and the cover should pop off.

AE27CB97-A57A-446F-963D-5522DCC93D2C.jpeg
The plastic cover on the mid section of the door pops upwards quite easily.

The clips are pretty tight but if you get a good grip at the bottom of the door panel where it is a bit more flexible and pull it away from the door the clips should pop out. Make sure to put all the clips back on the door panel if some are stuck on the door afterwards.

The speaker itself measures approx 160mm (6,5 inch) and I will try to get a set of the JBL Club 622 speakers and see if it will fit out of the box as it includes different sets of brackets to fit most car models, hopefully one of these brackets will fit the Honda e. Shops are closed for easter here but I will pick up the speakers on tuesday and let you guys know how it works out for me!

Good job, by any chance you can share a bit in detail or video how to remove the cover behind the handle? I can see the little gap and tried to use the tool that i got to open it but failed

[FDAD]

Hey FDAD, I am about to get the same and can you share more info like if it's a one-to-one replacement or how much work like cutting material etc wll be required?

Woowow stop right there! Don't you dare to cut anything! The is no need for that, for the mid speakers you'll need adapters both for wires and for the speaker itself. The original tweeters can be unscrewed and the new ones hotglued in place. I didn't cut a single wire.



You'll need something like this.

yea I had this adapter ordered days ago and wanna try it out anyway before cutting anything! now that I know the adapter will work and I think I will just wait until it arrive.

Turned out which center speaker you are using and no cutting too?

https://www.soundimports.eu/en/dayton-a ... a90-4.html

[williamchan]

Woowow stop right there! Don't you dare to cut anything! The is no need for that, for the mid speakers you'll need adapters both for wires and for the speaker itself. The original tweeters can be unscrewed and the new ones hotglued in place. I didn't cut a single wire.



You'll need something like this.

yea I had this adapter ordered days ago and wanna try it out anyway before cutting anything! now that I know the adapter will work and I think I will just wait until it arrive.

Turned out which center speaker you are using and no cutting too?

https://www.soundimports.eu/en/dayton-a ... a90-4.html

perfect thanks!