Is there a way to disable this coming up every single time?
I am using Apple Carplay in case that makes any difference.
Think the text in the manual on p. 256 is referring to a "Do not show again" in case of not pairing a phone at all.
As don't see such option selecting either button.
Startup message
I haven't tried it myself yet - someone here in the forum wrote the following (and I copied it to myself at the time):
“Switching off feedback display:
1. Put the vehicle into "ready to drive" mode.
2. Set the temperature condition to "Lo", and put the buttons for vent mode position and air recirculation in the mode as in the pic attached.
3. Switch the Climate control system OFF.
4. Switch the vehicle in OFF mode.
5. Press and hold both the vent mode position button and the air recirculation button.
6. Put the vehicle into "ready to drive" mode (keep the buttons pressed).
7. Keep the buttons pressed until "19.0" is shown in the AC display (first, "31.0" is shown).
8. Release the buttons.
To switch the feedback display back on, the steps are identical, just set the temperature condition to "Hi" in step 2 and release the buttons when "31.0" is shown in step 7.”
“Switching off feedback display:
1. Put the vehicle into "ready to drive" mode.
2. Set the temperature condition to "Lo", and put the buttons for vent mode position and air recirculation in the mode as in the pic attached.
3. Switch the Climate control system OFF.
4. Switch the vehicle in OFF mode.
5. Press and hold both the vent mode position button and the air recirculation button.
6. Put the vehicle into "ready to drive" mode (keep the buttons pressed).
7. Keep the buttons pressed until "19.0" is shown in the AC display (first, "31.0" is shown).
8. Release the buttons.
To switch the feedback display back on, the steps are identical, just set the temperature condition to "Hi" in step 2 and release the buttons when "31.0" is shown in step 7.”
This is for the displays that show everytime you change the AC settings or seats heater. For the start up message I don't know a way to disable it.RAL7004 wrote: ↑Sun May 16, 2021 1:54 pm I haven't tried it myself yet - someone here in the forum wrote the following (and I copied it to myself at the time):
“Switching off feedback display:
1. Put the vehicle into "ready to drive" mode.
2. Set the temperature condition to "Lo", and put the buttons for vent mode position and air recirculation in the mode as in the pic attached.
3. Switch the Climate control system OFF.
4. Switch the vehicle in OFF mode.
5. Press and hold both the vent mode position button and the air recirculation button.
6. Put the vehicle into "ready to drive" mode (keep the buttons pressed).
7. Keep the buttons pressed until "19.0" is shown in the AC display (first, "31.0" is shown).
8. Release the buttons.
To switch the feedback display back on, the steps are identical, just set the temperature condition to "Hi" in step 2 and release the buttons when "31.0" is shown in step 7.”
- rickwookie
- Posts: 848
- Joined: Thu Sep 12, 2019 1:30 am
- Location: St Albans, UK
- Contact:
Yeah same, I just ignore it now. The system is so laggy at startup anyway that even if I try to click start, it takes a while to register.
- Highanddry
- Posts: 85
- Joined: Sat Mar 06, 2021 8:03 am
Thanks to all, so nothing we can do then, other than let it go away after popping up..
Thought I was on to something reading the manual for once !
Thought I was on to something reading the manual for once !
There is a way to do it but not for the Honda e
www.autohack.org
www.autohack.org
Hey, I'd like to do this, but there are no pics - what mode should vent and circulation be in?RAL7004 wrote: ↑Sun May 16, 2021 1:54 pm I haven't tried it myself yet - someone here in the forum wrote the following (and I copied it to myself at the time):
“Switching off feedback display:
1. Put the vehicle into "ready to drive" mode.
2. Set the temperature condition to "Lo", and put the buttons for vent mode position and air recirculation in the mode as in the pic attached.
3. Switch the Climate control system OFF.
4. Switch the vehicle in OFF mode.
5. Press and hold both the vent mode position button and the air recirculation button.
6. Put the vehicle into "ready to drive" mode (keep the buttons pressed).
7. Keep the buttons pressed until "19.0" is shown in the AC display (first, "31.0" is shown).
8. Release the buttons.
To switch the feedback display back on, the steps are identical, just set the temperature condition to "Hi" in step 2 and release the buttons when "31.0" is shown in step 7.”
-
- You may also be interested in...
- Replies
- Views
- Last post
-
- 14 Replies
- 8092 Views
-
Last post by 555djx