HONDA E SPARES [P/N]

[FDAD]

Cabin / Pollen Filters

80292-TLA-505 - ENHANCED CABIN AIR / POLLEN FILTER (I would recommend the enhanced filter, far superior to the original cabin filter that is fitted from factory)

80291-TF3-E01 - STANDARD CABIN AIR / POLLEN FILTER

Front Suspension Components

(1) 51401-TYF-E02 - SPRING, FR.

(2) 51403-TRT-A01 - RUBBER, L. FR. SPRING MOUNT UPPER (RIGHT & LEFT)

(3) 51608-TBA-A00 - CAP, FR. SHOCK ABSORBER MOUNTING

(4) 51611-TYF-E02 - ABSORBER UNIT, R. FR. SHOCK

(5) 51621-TVF-E02 - ABSORBER UNIT, L. FR. SHOCK

(6) 51670-TYF-E01 - FR. SHOCK ABSORBER MOUNTING RUBBER

(7) 51684-TYF-E01 - FR. SPRING MOUNT LOWER

(11) 51726-TRT-A01 - BEARING FR SHOCK ABSORBER MOUNT

FR = Front
L = Left
R = Right

Screenshot 2022-12-10 at 18.56.59.png
s-l1600-2.jpg

is the car uk or euro spec?

[stzrd]

is the car uk or euro spec?

UK spec, RHD. I'll update the post to add this

[ndoo]

Electric Servo Brake (“Brake Booster”) - 01469-TYF-J01 SIMULATOR SET, BRAKE OPERATING (REWRITABLE)

Had mine fail and throw up a laundry list of errors. No idea why it failed.

[FDAD]

Electric Servo Brake (“Brake Booster”) - 01469-TYF-J01 SIMULATOR SET, BRAKE OPERATING (REWRITABLE)

Had mine fail and throw up a laundry list of errors. No idea why it failed.

Do you have a picture of the part?

[ndoo]

Electric Servo Brake (“Brake Booster”) - 01469-TYF-J01 SIMULATOR SET, BRAKE OPERATING (REWRITABLE)

Had mine fail and throw up a laundry list of errors. No idea why it failed.

Do you have a picture of the part?

[FDAD]

Electric Servo Brake (“Brake Booster”) - 01469-TYF-J01 SIMULATOR SET, BRAKE OPERATING (REWRITABLE)

Had mine fail and throw up a laundry list of errors. No idea why it failed.

Do you have a picture of the part?

F712A43B-2374-40D0-BBCD-9FF4708D5D5B.jpeg

56CE5DF8-29E3-483D-9A77-8F869AD71D15.jpeg

10849B24-52DA-42D5-9670-FA51D972300C.jpeg

Besides the errors, did it fail completely or something else?

[ndoo]

Besides the errors, did it fail completely or something else?

It failed completely, similar to when a brake booster in an ICE fails, the brake pedal feel was completely ruined and I had to step hard and almost to the end of the pedal travel to get braking.

All the assist features that used brake assist also failed, including (from what I can remember):

- All collision avoidance
- Lane keeping/cut-in prediction
- Cruise control
- 1 pedal mode
- Brake hold

Including one more I did not expect, the steering assist was also disabled (I assume this is brake/torque steering), so the steering wheel felt different.

[FDAD]

Besides the errors, did it fail completely or something else?

It failed completely, similar to when a brake booster in an ICE fails, the brake pedal feel was completely ruined and I had to step hard and almost to the end of the pedal travel to get braking.

All the assist features that used brake assist also failed, including (from what I can remember):

- All collision avoidance
- Lane keeping/cut-in prediction
- Cruise control
- 1 pedal mode
- Brake hold

Including one more I did not expect, the steering assist was also disabled (I assume this is brake/torque steering), so the steering wheel felt different.

Great feedback, thanks for taking the time.

[milligoon]

No mention of a recall with a safety critical part failure?

[hondaeboy]

H emblem front: 75700-TYF-E01 (height 7,5 cm)
H emblem back: 75701-TYF-E01 (height 7,0 cm)
"Honda e" back: 75722-TYF-E01
Nut to fasten emblems: 90301-ST0-003

Thanks to this thread, I just realised I didn't have the letters "HONDA E" on the back anymore. Well, it was actually when someone asked me what type of Renault I was driving, and I was trying to point at the non-existent "E" on the back. The letters were removed after wrapping the car, and simply forgot to apply new letters.

I was wondering... can the front and back H emblems be easily replaced with existing Type R emblems of the same or similar size?

I was thinking these ones:
75700-S5T-E01 (width 9,2 cm x height 7,5 cm)
75701-S6M-Z01 (width 8,6 cm x height 7,0 cm)