Aftermarket wheels

Faults and Technical chat for the Honda E
User avatar
Left4Cookies
Posts: 194
Joined: Fri Jul 10, 2020 9:49 am

Post by Left4Cookies »

Trykpaa wrote: Mon Nov 23, 2020 10:28 pm
Left4Cookies wrote: Mon Nov 23, 2020 7:07 pm Damnit, I knew I should have bought new rims when fitting the winters. Yours look so much better!
If you would rather have another colour, it could be a candidate for a plasti-dip DIY project. Never tied my self, but have seen a good result.
That's a great idea, didn't even know that was a thing. Looks easy enough to do, so now I just have to muster the courage to actually try it out..

avoid
Posts: 6
Joined: Sun Apr 17, 2022 11:52 am

Post by avoid »

Trykpaa wrote: Sat Oct 31, 2020 10:26 pm The OEM wheels on our Advance have these dimensions
Front: 17x6,5" 5x114,3 ET55 Bore 64,1mm
Rear: 17x7,5" 5x114,3 ET50. Bore 64,1mm
What about the standard 16 inch? Does anyone know their dimensions?

LE: Found it :)
londiniumperson wrote: Sat Feb 05, 2022 9:03 pm FYI:

Factory 16” wheel size:
  • Front: 6Jx16 ET50
  • Rear: 7Jx16 ET45
  • Front Tyres 185/60 R16
  • Rear Tyres 205/55 R16
Factory 17” wheel size:
  • Front:6.5Jx17 ET55
  • Rear: 7.5Jx17 ET50
  • Front Tyres 205/45ZR17
  • Rear Tyres 225/45ZR17
These are the tyre width ranges for each wheel width:
Rim width / Min Tyre Width / Ideal Tyre Width / Max Tyre Width
6 Inches 175 mm 185 or 195 mm 205 mm
6.5 Inches 185 mm 195 or 205 mm 215 mm
7.0 Inches 195 mm 205 or 215 mm 225 mm
7.5 Inches 205 mm 215 or 225 mm 235 mm

Would like to use 16” for winter and keep the 17” with the summer tires.

Did anyone go with this approach? I am doing something similar with my volvo but every time these are swapped there is a need to recalibrate the computer. Is this the case with the e too?
milligoon
Posts: 691
Joined: Sat Aug 15, 2020 11:22 pm

Post by milligoon »

Does the volve have TPM modules in the wheels? If so then it's lost contact. I think Honda do it like Mazda measuring difference in wheel rotation to detect deflation in a wheel
Ex e owner
User avatar
londiniumperson
Posts: 1764
Joined: Fri Oct 11, 2019 2:37 pm

Post by londiniumperson »

milligoon wrote: Sun Apr 17, 2022 3:44 pm Does the volve have TPM modules in the wheels? If so then it's lost contact. I think Honda do it like Mazda measuring difference in wheel rotation to detect deflation in a wheel
As 'milligoon' has mentioned, I also think that the Honda uses wheel rotation, possibly by using the Electronic brakeforce distribution (EBD) / Anti-lock Braking System (ABS) / Vehicle Stability Assist (VSA) sensor(s) to compare wheel speed. Therefore if all of the wheels/tyres are replaced at the same time then calibration is probably not required, though the manual does state:
You must start deflation warning system calibration every time you:
  • Adjust the pressure in one or more tyres.
  • Rotate the tyres.
  • Replace one or more tyres.
but it's an easy task if you do need to perform it:
The calibration process requires approximately 30 minutes of cumulative driving at speeds between 40-100 km/h (25 - 62 mph).
During this period, if the power system is turned on and the vehicle is not moved within 45 seconds, you may notice the low tyre pressure indicator comes on briefly.
This is normal and indicates that the calibration process is not yet complete.
You can calibrate the system from the customized feature on the audio/information screen.
  1. Set the power mode to ON.
  2. Select All Apps.
  3. Select Vehicle Settings.
  4. Select Deflation Warning System.
  5. Select Cancel or Calibrate.
  • If the Calibration Failed to Start. message appears, repeat step 5.
  • The calibration process finishes automatically.
2022 Advance in Crystal Black Pearl on 17's - 08/2020-Current
2015 VW Tiguan (Pure White) - 04/2018-Current
1991 Honda Beat PP1 (Festival Red) - 11/2022-Current
avoid
Posts: 6
Joined: Sun Apr 17, 2022 11:52 am

Post by avoid »

Thanks for the info!

Yes, the Volvo does have TPM modules. However - they mentioned that the calibration was required for the speed & mileage. It is also very likely that they didn’t know what they were talking about as the service quality for Volvo degraded lately here in my country.

Do you know if there are any other options for the 16” rims other than the brock / rc design? They are nice but hard to find at a reasonable price here.
BKonda
Posts: 1
Joined: Fri Apr 08, 2022 8:10 pm

Post by BKonda »

Where are the 19" boys out there?
User avatar
ZeroEmissionRequiem
Posts: 48
Joined: Mon Mar 13, 2023 7:47 pm

Post by ZeroEmissionRequiem »

avoid wrote: Sun Apr 17, 2022 4:51 pm Do you know if there are any other options for the 16” rims other than the brock / rc design? They are nice but hard to find at a reasonable price here.
While my car came with the 17" wheels, I wanted 16" for winter use. Once a dealership quoted me more than 2000 € OEM 16" wheels, I decided to go aftermarket, and after quite a bit of searching found a 16" set in exact factory spec (diameter, widths, pcd, offsets, cb) for front and rear. Total cost with delivery was 440 €.

Image

Here's a (Finnish) website with photos and size information; black & silver.
2022 e Advance
User avatar
ARTEM
Posts: 25
Joined: Mon Sep 12, 2022 8:43 am

Post by ARTEM »

Honda accord type s rims!

WhatsApp Image 2023-05-11 at 20.15.33 (1).jpeg

WhatsApp Image 2023-05-11 at 20.15.33 (2).jpeg

WhatsApp Image 2023-05-11 at 20.15.33.jpeg

WhatsApp Image 2023-05-11 at 20.15.34.jpeg

User avatar
FDAD
Posts: 492
Joined: Mon Aug 10, 2020 1:55 pm
Location: Porto, Portugal

Post by FDAD »

ARTEM wrote: Mon May 15, 2023 11:17 am Honda accord type s rims!
Very nice :)
Honda E advance [Modern Steel Metallic] 8-) [DELIVERED JULY 2020] - 85 000Kms + ✌️🎂
ZoeDave
Posts: 146
Joined: Mon Dec 14, 2020 9:26 pm

Post by ZoeDave »

ARTEM wrote: Mon May 15, 2023 11:17 am Honda accord type s rims!
I'm one of those boring people who doesn't like aftermarket rims or modifications, and even I think they look great!
Post Reply

  • You may also be interested in...
    Replies
    Views
    Last post